The ultrasonic wave spreads in the liquid, so that the liquid and the cleaning tank vibrate together under the ultrasonic frequency. The liquid and the cleaning tank vibrate at their own natural frequency. This vibration frequency is the acoustic frequency, so people hear the buzz. With the continuous development of cleaning industry, more and more industries and enterprises use ultrasonic cleaner.
Principle:
The principle of ultrasonic cleaning machine is mainly through the transducer, the sound energy of the power ultrasonic source is converted into mechanical vibration, and the ultrasonic radiation is radiated to the cleaning liquid in the tank by cleaning the tank wall. Due to the radiation of ultrasonic waves, the micro bubbles in the liquid in the tank can maintain vibration under the action of sound waves. Destroy the adsorption of dirt and the surface of the cleaning parts, cause fatigue damage to the dirt layer and be dismissed, and the vibration of gas-type bubbles scrubs the solid surface
Advantages
1. Wash more thoroughly
The principle of ultrasonic cleaning machine shows that this method is very suitable for cleaning complex shape components. If such parts are manually cleaned, there are many parts that are difficult or impossible to clean. Cleaning agent can only dissolve part of the dirt, for stubborn dirt and parts inside the dirt is powerless. ultrasonic cleaner technology cleaning is a wonderful physical cleaning, like countless small bombs at the same time blasting to remove the inner and outer surfaces of objects, such as chemical cleaning combined with cleaning agent, so you can make the traditional method can not complete the inner surface and inner hole cleaning a complete.
2. Save energy
Small parts of the cleaning of the current use of gasoline or diesel brush, so the operation safety factor is very low, easy to cause accidents. And ultrasonic technology cleaning using water – based cleaning agent, no accident hidden danger.
3. Simple operation and high efficiency
Just disassemble the parts and put them in the screen basket of the cleaning machine and press the switch to clean them automatically.
4. Low cleaning cost
Because of the high repetition rate of cleaning agent and the cheap purchase of consumables, the cleaning cost can be roughly divided into equipment cost and consumption cost in all cleaning methods. Ultrasonic cleaning machine equipment service life is about ten years, in addition to equipment purchase cost is higher than manual cleaning and organic alkaline solvent scrub, lower than gas cleaning and high pressure water jet cleaning.
Application:
ultrasonic cleaner. is widely used in surface spraying treatment industry, machinery industry, electronic industry, medical industry, semiconductor industry, watch and jewelry industry, optical industry, textile printing and dyeing industry. Other industries, the use of The machine in other industry is as follows
1. surface spraying treatment industry: (cleaning attachment: oil, mechanical chips, abrasives, dust, polishing wax) before electroplating to remove carbon deposition, remove oxide skin, remove polishing paste, oil removal rust removal, ion plating before cleaning, phosphatizing treatment, metal workpiece surface activation treatment. Stainless steel polishing products, stainless steel knives, tableware, knives, locks, lighting, hand ornaments before spraying treatment, plating before cleaning.
2. machinery industry: (cleaning attachment: cutting oil, abrasive, iron, dust, fingerprint)
The removal of antirust grease; Measuring tools cleaning; Degreasing and rust removal of mechanical parts; Engine, engine parts, gearbox, shock absorber, bearing bush, nozzle, cylinder block, valve body, carburetor and auto parts and chassis paint before degreasing, rust removal, photostatting cleaning; Filter, piston accessories, filter screen dredge cleaning, etc. Precision machinery parts, compressor parts, camera parts, bearings, hardware parts, moulds, especially in the railway industry, it is very suitable for oil and decontamination of air conditioning of train carriage, rust prevention, rust removal and oil removal of locomotive parts.
Post time: May-28-2022